Toms Wallet

I love Toms, and I’ve always admired the things people do with Toms stuff.  I especially like the idea of a Toms wallet, which is made with the flag that comes with your shoes.  So I was pretty excited when I found my Toms flag while cleaning under my bed.

However, I didn’t like any of the tutorials I found online.  Most had few pockets; plus I wanted a flap.  I found a few people who made theirs differently, but in those cases the tutorials weren’t very clear.  So I made my own.  :)

I actually ended up using my Toms bag, which the shoes come in — no boxes for Toms!  The double-sided-ness of the bag meant my wallet ended up being almost fully lined.  Ready?

1.  Take the drawstring out of the bag.  You won’t be needing it.  Lay the bag flat and cut two strips off from the sides — 2 1/4 inches on the side with the T and 2 1/2 inches on the side with the S.  This will create a band of fabric kind of like a really wide headband.

Chop, chop. I barely measured, by the way. That lazy bones thing. . .yeah, there was a reason for that.

2.  Take your big piece and hide the raw edges by pinning the open sides inward about 1/2 inch.  Iron this to make a crease, then take those pins out and pin the folded sides together.  Sew up the sides — this will make your lining.

The raw edges are pinned down. I did this kind of in a circle. My apologies if the pictures are confusing. :(
This is after creasing and repinning the two sides together.
Sides have been sewn. I am pulling back the edges to show you how the raw edges have been sewn in.

I did it this way to cut down on sewing.  I could have sewn the raw edges down and then sewn the two sides together, but it was much easier and quicker to do it all at once.  Irons are your friend.

3.  Your wallet should be a flat rectangle shape that looks like the Toms logo.  Turn the fabric over so that the “One for One” logo faces up.  Fold the bottom edge up until you see the bottom of the blue stripe.  This is where your money will go.  I decided to make a little change pocket by measuring the width of a dollar and sewing by the left edge of the dollar.

Here I’m measuring. You can see how I’ve folded the fabric and slid the dollar in so it’s pretty close to the right edge (not too close — you want to be able to sew the whole thing closed later).
The change pocket is sewn. I have not sewn up the sides of the wallet yet, see?

If you want, this is the time to make a button hole on the change pocket and add a button to keep the change from slipping out.  You could also use a snap or Velcro, although if you use a snap you might want to attach it before you sew.  I had no Velcro or snaps, and unfortunately I don’t have a button foot either.  I may just use the pocket for chapstick or something, because it really is pretty small.

4.  Now you’ll make the credit card pockets.  Remember those strips you cut off at the beginning?  Take the one that had the drawstring in it, lay it so the drawstring side is facing away from you, and fold up approximately 3/8 inch from the bottom.  Iron a crease.  Unfortunately I forgot to take a picture of this.

Next fold this strip in half so you know where the middle is.  Crease it if you want; it makes it easier to see.  Sew up this line to make two separate credit card pockets (this is another thing I didn’t like about the tutorials I found — no separation — gaah!).  Make sure to test both pockets with a card, and put the cards close the middle so you’ll have room to sew on the sides later.

Raw edges are creased under, and pockets are separated.

5.  Pin your credit card pocket to the bottom of your wallet and sew.

Bottom edge is sewn. All that’s left is. . .

6.  Sew up the sides of the pockets.  Be really careful when you do this; the fabric is thick.  I broke a needle, but after that I used a jeans needle, which worked well.  You don’t have to sew completely to the top or bottom because money and credit cards are big and won’t fall out a tiny hole.  I did have to sew right angles to get around the rivet on one side.  Not a big deal.  You could always just skip that part and have a tiny hole if you can’t sew around it.  Fold the flap down.

Tada!  There are a bunch of things you could do with this wallet, like add Velcro to the flap.  One idea I had (too late to do to mine) would be to make a credit card “window.”  For this, just cut out a square from one side of your credit card pocket and sew a slightly bigger square of plastic onto the backside.  The CapriSun Roarin’ Waters juices have a clear back; just empty a juice pouch, cut into the bottom to wash it, and cut a square out of the clear back.

Two money pockets, two credit card pockets, change/misc. pocket, flap. Mission accomplished.
Open the flap! Open it! Because it’s there.
Back of the wallet has the nice Toms logo.
You can even fold it in half. Gasp!
Standing tall and proud. ^_^

Because I didn’t measure much, the edges didn’t match up perfectly.  However, I like it because it gives the wallet kind of a rugged look.  That’s the final thing that differentiates mine from the ones on the Web — others had that rugged look because of raw edges.  I like the “rugged” idea, but I hate raw edges.  Therefore, compromise.

I think Toms would be proud.

Advertisements

8 thoughts on “Toms Wallet

  1. Pingback: Toms Flag Curling Iron Case « Lazy Bones Refashion

What's your opinion?

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s